Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 38 / 48

7. Safety Inspections
It is recommended to conduct regular scheduled inspections of the Multi-Tip. This helps to
ensure operator safety and extend the service life of the machine.
The inspection schedule is divided into two parts: monthly inspections and annual
inspections. The inspection procedures are described in the following pages, along with logs
for recording the results.
Simpro strongly recommends that safety inspections are carried out according to the
schedule described in this section.
Operators should immediately stop using the machine and request an inspection if any
fault or abnormal operation is observed.
7.1 Pre-inspection checklist
1. Wear suitable Personal Protective
Equipment (PPE), including safety
boots and protective eyewear.
2. Ensure there are no ignition sources
nearby.
3. Lower the cradle and remove bin.
4. Turn off the key switch and unplug
the charging lead.
5. Remove the powerpack cover.
6. Clean the powerpack and electric
circuitry with compressed air.
7. Always use height safety
equipment when servicing
elevated areas.
7.2 Monthly inspection
The following inspection should be carried out every month, and the results recorded in the
log on the following page.
Monthly Inspection Checklist
Category No. Item Check
General 1 Entire machine
Visually inspect for dented or broken parts.
Conduct a complete tipping cycle and check for any
faults or abnormal behaviour.
Hydraulic
systems
2 Hydraulic ram Check there are no oil leaks.
3 Oil reservoir
Check the level of hydraulic fluid and top up if
necessary, in accordance with specs in
Section 5.7.4 .
Safety
systems
4
Dual-hand
controls Check that dual-hand controls operate correctly, and
machine stops when the SAFETY button is released.
Mechanical
systems
5 Inside mast
Lightly lubricate with silicone spray. 6 Pivot roller
7 Cradle axle
8 Tipping guide flap Check that flap is undamaged and moving freely.
9 Castor wheels
Check that the castor wheels are running smoothly
and both footbrakes are working correctly.