Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 23 / 48

User Manual | Simpro Multi-Tip®
Original Instructions | English | v35.0 | December 2019 | Page
22
4.2.5 ANSI Bar-lift Cradle with base
4.2.5.1 Emplacing bins
Place the bin, drum or container onto the cradle, positioned centrally
against the backplate. Once the bin is correctly emplaced, walk to the
control panel.
When moving heavy non-wheeled containers it is recommended
to use a specialised dolly, hand truck or forklift attachment.
The catch arm(s) should be positioned to hold the top edges of
the bin, with a maximum free travel of 25mm (1 inch). The arm(s)
can be unbolted and repositioned to allow emptying bins of many
different sizes.
4.2.5.2 Removing bins
Take hold of the upper edge of the bin, drum or container, and pull it gently out of the
cradle.
4.2.6 Trunnion-lift Cradle (DIN9797 Eurobins & Foodcap®)
4.2.6.1 Emplacing bins
Wheel the bin into the cradle, positioned centrally, until it is firmly
against the stop-buffers. Take care that both trunnions are
properly seated in the lifting arms; some bins may need to be
e sh ke s gh e s e e ‘c ch’. O ce he b s
correctly emplaced, walk to the control panel.
4.2.6.2 Removing bins
Take hold the grab-handle on the rear of the Eurobin (or the
upper edge of the Foodcap® capsule), and pull it gently out of the cradle.
4.2.7 Combi-Cradle and Custom Cradle
4.2.7.1 Emplacing bins
Place the bin, drum or container onto the cradle, positioned centrally
against the backplate. Once the bin is correctly emplaced, walk to
the control panel.
When moving heavy non-wheeled containers it is recommended
to use a specialised dolly, hand truck or forklift attachment.
The catch arm(s) should be positioned to hold the top edges of
the bin, with a maximum free travel of 25mm (1 inch). The arm(s)
can be unbolted and repositioned to allow emptying bins of
many different sizes.
4.2.7.2 Removing bins
Take hold of the upper edge of the bin, drum or container, and pull it gently out of the
cradle.