Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 22 / 48

4.2.2 EN840 Base-lift Cradle (standard)
4.2.2.1 Emplacing bins
Place the wheelie bin onto the cradle. For full-size 240L bins, both
wheels should be positioned into a catch (on either side of the
cradle). For smaller bins such as 60L, 80L, 120L and 140L, only the
left-hand wheel needs be positioned into a catch. Once the bin is
correctly emplaced, walk to the control panel.
The wheel catches are designed to work with standard EN840 wheelie bins from leading
brands such as Europlast, Sulo, ESE, Weber, Craemer, OnePlastics and Trident.
Some smaller bin manufacturers use axles of different lengths. If the distance between
the wheels is slightly too large or small, the wheels may jam against the catches,
preventing a secure emplacement. Should this occur, simply unbolt and remove the
right-hand wheel catch. All bins can be securely held by the left-hand catch only.
Some smaller bin manufacturers use tyres which are too wide to fit inside the wheel
catches. Should this issue occur, simply insert additional packers (flat washers) onto the
wheel catch mounting bolts, to increase the spacing as needed.
4.2.2.2 Removing bins
Pull the wheelie bin gently out of the cradle, using the grab-handles provided.
4.2.3 EN840 Comb-lift Cradle
4.2.3.1 Emplacing bins
Place the wheelie bin into the machine, positioned centrally against the
cradle backplate. Take care that the lifting teeth are properly hooked
into the bin combing; smaller bins such as 60L and 80L may need to be
e f e s gh e s e e ‘c ch’. O ce he b s correctly
emplaced, walk to the control panel.
4.2.3.2 Removing bins
Pull the wheelie bin gently out of the machine, using the grab-handles
provided. Smaller bins may need to be tilted or lifted slightly to
detach them from the lifting teeth.
4.2.4 ANSI Bar-lift Cradle
4.2.4.1 Emplacing bins
Place the trash cart into the machine, positioned centrally against the cradle backplate.
Take care that the lifting catches are properly hooked into the front of the
cart; some carts may need to be tilted or shaken slightly to ensure a
pro
e ‘c ch’. O ce he cart is correctly emplaced, walk to the control
panel.
4.2.4.2 Removing bins
Pull the trash cart gently out of the machine, using the grab-handles
provided. Some carts may need to be tilted or shaken slightly to detach
them from the lifting catches.