Simpro Multi-Tip 1600, Руководство по обслуживанию

Страница: 20 / 26

7 Bin Cradle
7.1 General Description
The standard cradle is designed to hold all common 2-wheeled bins up to 240 litres. A range of
catch kits can be bolted on to enable it to hold 205-litre steel and plastic drums, Brute bins, and
other similar drums.
Other cradles are available to suit many other bins and drums, and these can be quickly and easily
interchanged if desired.
7.2 Removal and Refitting
I. Raise the cradle by approx. 800mm, undo the grub- screw in the outer shaft collar (3/16”
Allen key), and remove the collar.
II. Slide the cradle off the shaft, tipping to horizontal once the follower roller is clear of the
tipping guide.
III. Refitting is a reversal of the above procedure. Ensure the follower roller is correctly
located in the guide track, and slide the shaft collar up against the nylon bush when the
cradle is on as far as it can go. Tighten the grub-screw, then test-run the machine to make
sure the follower roller is not pressing too tightly against the guide track.