Simpro MegaDumper, Руководство пользователя

Страница: 29 / 60

User Manual // Simpro MegaDumper®
Original Instructions // English // v86.0 // February 2022 // Page
28
4.2 Cleaning
The machine should be cleaned with a low-pressure water jet, a microfiber cloth, and a mild
cleaning solution. Cleaning should only be carried out with the cradle lowered.
Do not clean the machine with a high-pressure water jet or waterblaster.
See §1.9 for IP ratings of the machine and major subcomponents.
If it is necessary to clean underneath the cradle, the control system can be modified to
allow this while maintaining operator safety
– contact your Simpro agent for assistance.
4.3 Cradle adjustment
Adjusting Type-S and Type-E cradles
The most common cradles fitted to the MegaDumper are the Type-S cradle (for
wheelie bins up to 660L) and the Type-E cradle (for wheelie bins up to 1100L).
These ‘b - l f ’ c l are very simple and reliable, but sometimes require minor adjustment
to consistently retain certain makes of wheelie bin.
Use of a Type-S or Type-E cradle that is not correctly adjusted may result in wheelie bins
falling out of the cradle when tipped.
In 2021 the MegaDumper model codes were simplified to a string of 8 or 9 characters,
indicating the model, tipping height, cradle type and powerpack. The letter in the
seventh position indicates the type of cradle; for instance,
MD2100S-3 is a machine with a
Type-S cradle. Where this letter is omitted, the default Type-E cradle is assumed.
On older models such as the MD600B-1800.3.C , h l ‘B’ c T -S
cradle. The former ‘ Type-B ’ cradle was renamed ‘ Type-S ’ cradle in 2021.
0650200001
0650200000
ch Sw A S c Sw A
A ll T S