Simpro Ezi-MT, Руководство пользователя

Страница: 10 / 36

2. Operating Instructions
2.1 Before operation
Before operating a Ezi-MT, check that the machine is stable and safe to use as follows:
1. Machine is on level ground, with a slope of 1:12 or less.
2. All covers and safety guards are in place.
3. The lifting strap is not visibly torn or frayed.
4. Both wheel brakes are applied.
5. All personnel other than the operator are well clear of the machine.
6. The cradle is fully lowered.
2.2 Emplacing and removing bins
All personnel using the machine must know how to correctly emplace and remove bins
from the machine. Bins that are not correctly emplaced may fall out when inverted.
The bin cradle is designed to allow bins to be emplaced and removed easily, while also
holding them securely throughout the lifting and tipping cycle. A range of different cradles
may be installed, depending on the types of bin that the machine needs to empty. Use the
following table to identify the correct instructions for your machine.
2.2.1 Cradle identification
Cradle Usage Bin Compatibility Cradle Image See
Type-E
(EN840
base-lift
cradle)
Standard waste
and recycling
applications in EU,
UK, AU, NZ, Asia,
Africa, and parts of
South America
EN840 mobile
garbage bins
(wheelie bins)
-
60L
-
80L
-
120L
-
140L
-
240L
§2.2.2
Type-C
(EN840
comb-lift
cradle)
Specialised waste
and recycling
applications
(primarily with 360-
litre bins) in EU, UK,
AU, NZ, Asia,
Africa, and parts of
South America
-
60L
-
80L
-
120L
-
140L
-
240L
-
360L
§2.2.3