User Manual // Simpro Eurover
Original Instructions // English // v34.0 // April 2022 // Page
30
8.
Technical Data
The Eurover is available in four primary models, with maximum tipping heights of 2200mm or
2500mm and left- or right-handed orientation. Mobile base units are available for all models.
Parameter
EO2200
EO2200R
EO2500
EO2500R
Mast orientation
Left-hand
Right-hand
Left-hand
Right-hand
Height, lowered (
HL
)
2790mm
3090mm
Height, raised (
HR
)
3160mm
3460mm
Height, tipping (
HT
)
700mm - 2200mm
1900mm - 2500mm
Length, overall (
LO
)
1030mm
Width, overall (
WO
)
1045mm
Weight, overall
350kg
400kg
Lifting capacity
350kg
Cradle compatibility
DIN9797-compliant trunnion-lift 200L/300L Eurobins
Bin throw
~300mm (from bolt-down base, with 200L Eurobin)
Power specifications*
~400VAC 50/60Hz 3-phase mains input, max draw ~3 Amps, output 1.1kw
User interface
RAISE button, LOWER button, EMERGENCY STOP button
Ingress protection
IP56 overall
Cradle travel speed
0.12m/s
Tipping cycle duration
<50 seconds
<60 seconds
Noise level at operator’s
ear
⪅
60dB(A)
Construction
304 stainless steel
Mounting
6x M16 x 100-150mm sleeve anchors (mobile base unit also available)
Applicable standards
and certifications
ISO9001, Conformité Européene (CE), DIN9797:1988-10, AS/NZS4024, ISO 13849-1, IEC
62061, EN 349 1993, EN 574 1996+A1:200, EN 953 1997, EN ISO 4413 2010, EN ISO 12100
2010, EN ISO13849-1 2006, EN ISO 13857 2008, EN 60204 2006+A1 2009, EN61000-6-2
2005, EN61000-6-4 2007, Machinery Directive 2006/42/EC, Electromagnetic
Compatibility Directive 2004/108/EC
* Power specifications may vary depending on the input voltage and frequency, and the motor configuration
H
T
H
R
LO
H
L
WO
