User Manual // Simpro Eurover
Original Instructions // English // v34.0 // April 2022 // Page
20
4.4
Transporting
Carry out the following procedures when transporting the Eurover:
1.
Lower the cradle, apply both brakes (if fitted) and disconnect the power.
2.
Use suitable lifting equipment to place the machine onto its side on a wooden pallet,
with the mast lowermost. Securely strap it into place.
3.
Load the pallet onto the truck deck using a forklift of at least 1-tonne capacity.
4.
Tie the pallet into place using marked tie-down points and strops rated to at least
1000kg. Ensure it is fastened against lateral forces from any direction.
Never lie the Eurover onto its front or back as this may damage the cradle and guarding.
4.5
Storing
If the Eurover is not to be used for a period of six months or more, it should be stored in a
clean, dry place with good ventilation, at temperatures not below 0
℃
. Carry out the
following procedures when placing the Eurover into storage:
1.
Conduct two complete tipping cycles, then lower the cradle to the ground.
2.
Depress the EMERGENCY STOP button and disconnect the power.
3.
Clean the machine thoroughly as per
4.
Apply a thin layer of silicone lubricant to exposed surfaces of moving parts.
5.
If a key-switch is fitted, remove the key and store it in a safe location.
