Simpro Dumpmaster, Руководство пользователя

Страница: 22 / 60

4.2.2 EN840 Base-lift Cradle (standard)
4.2.2.1 Emplacing bins
Open the door and place the wheelie bin onto the cradle. For full-
size 240L bins, both wheels should be positioned into a catch (on
either side of the cradle). For smaller bins such as 60L, 80L, 120L and
140L, only the left-hand wheel needs be positioned into a catch. Once
the bin is correctly emplaced, close the door.
The wheel catches are designed to work with standard EN840 wheelie bins from leading
brands such as Europlast, Sulo, ESE, Weber, Craemer, OnePlastics and Trident.
Some smaller bin manufacturers use axles of different lengths. If the distance between
the wheels is slightly too large or small, the wheels may jam against the catches,
preventing a secure emplacement. Should this occur, simply unbolt and remove the
right-hand wheel catch. All bins can be securely held by the left-hand catch only.
Some smaller bin manufacturers use tyres which are too wide to fit inside the wheel
catches. Should this issue occur, simply insert additional packers (flat washers) onto the
wheel catch mounting bolts, to increase the spacing as needed.
4.2.2.2 Removing bins
Open the door and pull the wheelie bin gently out of the cradle, using the grab-handles
provided.
4.2.3 EN840 Comb-lift Cradle
4.2.3.1 Emplacing bins
Open the door and place the wheelie bin into the machine, positioned
centrally against the cradle backplate. Take care that the lifting teeth
are properly hooked into the bin combing; smaller bins such as 60L and
80L may need to be tilted or lifted slightly to ensure a proper
‘ catch ’ .
Once the bin is correctly emplaced, close the door.
4.2.3.2 Removing bins
Open the door and pull the wheelie bin gently out of the machine,
using the grab-handles provided. Smaller bins may need to be tilted
or lifted slightly to detach them from the lifting teeth.
4.2.4 ANSI Bar-lift Cradle
4.2.4.1 Emplacing bins
Open the door and place the trash cart into the machine, positioned centrally against the
cradle backplate. Take care that the lifting catches are properly hooked into the front of the
cart; s
ome carts may need to be tilted or shaken slightly to ensure a proper ‘catch’.
Once the cart is correctly emplaced, close the door.
4.2.4.2 Removing bins
Open the door and pull the trash cart gently out of the machine, using the
grab-handles provided. Some carts may need to be tilted or lifted slightly
to detach them from the lifting catches.