SimpliFire SF-INS25, Руководство по обслуживанию

Страница: 7 / 9

7
SimpliFire • SF-INS25, SF-INS30, SF-INS35 Service Manual • 2042-960 • 3/21
Remote Receiver Replacement
1. If necessary, place a drop cloth or other material on
the hearth or flooring to prevent scratching.
2. Remove front. Refer to Front Replacement section
for details.
3. Remove glass. Refer to Glass Replacement section
for details.
4. Remove log/grate assembly. Refer to Log/Grate
Assembly Replacement section for details.
5. Remove screws holding the plastic diffuser
brackets and panel in place. See Figure 5.
6 . The remote receiver is positioned in the center of
the appliance behind the plastic diffuser panel. Using
a pliers, compress each barbed clip while lifting the
remote receiver board evenly to disengage it from the
clip. See Figure 15.
7. Disconnect the wiring harness from the top of the
receiver. See Figure 15.
8. Securely reconnect the wiring harness to the new
remote receiver. See Figure 15
9. Carefully align the new remote receiver board to the
barbed clips and push in place. See Figure 15.
10. Re-install the plastic diffuser brackets and panel.
11. Re-install log/grate assembly.
12. Re-install glass.
13. Re-install front.
(RECEIVER-ELECT)
Figure 15 Remote Receiver Replacement
BARBED CLIPS BARBED CLIPS
WIRE WIRE
CONNECTOR CONNECTOR