background image

1

SimpliFire •  SF-FORMAT36 Service Manual  •  2042-961  •  9/21

SERVICE MANUAL

Model: SF-FORMAT36

- Instructions -

This manual will assist a qualified service technician in the 

replacement of parts.  Contact your dealer to arrange a 

service call by a qualified service technician.

NOTICE!  DO NOT discard any hardware while 

servicing. 

 

Some hardware must be reused.

Replacement parts include:

Control Board Assembly
Heater Assembly
Wall Mount Bracket
Remote Control
FM43 Accent LED Light Assembly
Log Assembly
FM50 LED Mantel Side Panels
FM60 LED Mantel Side Panels

1. Introduction

Table of Contents

1.  Introduction/Table of Contents ..................................1
2.  Replacement Part - Appliance Diagram.....................1

3.  Replacement Instructions

       

3.1  Mantel Side Panels Replacement............................. 3

        3.2  Mantel Removal and Install (FM43).......................... 3
        3.3  Mantel Removal and Install (FM50/FM60)................ 3
        3.4  Heater Assembly Replacement................................. 4
        3.5  Control Board Replacement...................................... 5
        3.6  Accent LED Replacement..................... ................... 6
        3.7  Log Assembly Replacement...................................... 6

 

4.  Troubleshooting Guide.............................................. 7  

2. Replacement Part - Appliance Diagram

LED Mantel Side

Panel (FM50/FM60)

Heater Assembly

Control Board 

Assembly

LED Mantel Side

Panel (FM50/FM60)

Under Lighting  

Assembly (FM43 Only)

NOTICE!  DO NOT discard any hardware while

servicing.

  Some hardware must be reused.  

Содержание SF-FORMAT36









Отзывы: