Simplex 4100-5124, Инструкция по установке

Страница: 1 / 4

4100-5124 Class A Adapter Card
Installation Instructions
©
2001-2011 SimplexGrinnell LP. All rights reserved.
Specifications and other information shown were current as of publication and are subject to change without notice.
Simplex and the Simplex logo are trademarks of Tyco International Ltd. and its affiliates and are used under license. 579-337
Rev. B
This publication describes the installation procedure for the 4100-5124 Class A Adapter Card.
This card mounts to a TrueAlert Power Supply (TPS) and converts the three standard Class B
Signaling Line Circuits (SLCs) on the TPS to Class A SLCs.
Refer to the 4100-5120/5121/5124 TrueAlert Power Supply Installation Instructions (579-336) for
information on installing the TPS and wiring Class A SLCs.
Upon unpacking your Simplex product, inspect the contents of the carton for shipping damage. If
damage is apparent, immediately file a claim with the carrier and notify Simplex.
This publication discusses the following topics:
Topic See Page #
Cautions and Warnings 2
Mounting to the TPS 3
Introduction
Inspecting Contents
of Shipment
In this Publication
firealarmresources.com