SimonsVoss WaveNet, Руководство пользователя, Страница: 164 / 210

5. Click on the OK button.
9
The "WaveNetManager" window closes.
6. Click on the button Save .
9
RouterNode is reset and deleted from the WaveNet topology.
Resetting Ethernet RouterNodes via the Browser Interface
ü Browser interface open (see
Browser interface [
}
140]
).
1. Via | ADMINISTRATION | open the tab [FACTORY].
9
You will see the restore menu.
2. Click on the button Reset .
9
Restore is performed.
9 Ethernet RouterNode is reset to factory setting.
Resetting RouterNodes via Hardware
All RouterNodes support a hardware reset. You can reset these
RouterNodes with the reset button on the board. For further information,
please refer to the manual or the short manual of the respective
RouterNode.
5.5.5.3 WaveNet
Importing the WaveNet topology also removes reset LockNodes from LSM.
The segments of RouterNodes and CentralNodes/RouterNodes with
Ethernet connection remain. You must remove these later:
1. Remove RouterNodes from communication nodes or local connections
2. Remove segments
WaveNet (Manual)
5. WaveNet Manager
164 / 210