1. Bayonet disc
2. Thumb-turn
3. Bayonet disc closed
4. Bayonet disc open
Place the installation key on the outer thumb-turn in such a way that its
two teeth engage into the outer thumb-turn (if necessary, turn the thumb-
turn until both teeth lock into the locking disc). Lock the thumb-turn into
position again by rotating it 30° in a clockwise direction.
6.3.1.4 Carry out a functional test
1. Engage cylinder using a valid ID medium and turn the thumb-turn in
both the locking and opening direction with the door open. The thumb-
turn must be able to rotate easily when you do so.
2. Close the door and repeat the process. If the locking cylinder should be
stiff, you need to align the door or modify the strike plate.
6.3.2 Fitting an anti-panic cylinder
1. Inside thumb-turn
2. Recessed grip ring
3. Battery replacement key
4. Outside thumb-turn
Digital Locking Cylinder 3061
(Manual)
6. Installation instructions
27 / 54
