Simons Voss Technologies SOM + SREL3.ADV, Руководство пользователя

Страница: 9 / 27

5 Before placing an order
5.1 SmartRelay
At least one SmartRelay is required to operate a SmartOutput module. To
order a SmartRelay, read the manual concerned on the required
SmartRelay or contact us (see Help and contact).
5.2 Determining the number of required modules
Up to fifteen external modules can be connected to a SmartRelay 3
Advanced. Each module can be configured separately from one another
using the software.
Only four outputs are available on module 15 (up to 116 additional outputs
in total).
5.3 Acquiring and configuring power supply units
SmartRelay and up to eight SmartOutput modules can be operated with a
power supply unit. The power supply unit must be able to deliver a suitable
output voltage (recommended: 12 V
DC
) and provide sufficient current (see
Technical specifications [
}
22]
for power input).
5.4 Determining installation technology and location
SmartOutput modules are fastened to DIN rails. SmartRelay are not
usually fitted to DIN rails.
5.5 Cable types and routes
SmartOutput modules should be fitted in such a way that all cables can be
installed without bending them too much.
5.6 installation outside
Modules are not designed for outdoor installation without additional
protective measures.
5.7 Guidelines
Specialist trained to EN 18328 requirements should install the module. VDE
guidelines must be observed.
SOM + SREL3.ADV (Manual)
5. Before placing an order
9 / 27