
Note.
A Transmit Limit Timer may be setup that limits a continuous transmission on a
channel. The last 10 seconds before the timer expires may be accompanied by
warning beeps.
When transmitting a private call, the icon to the right will be displayed.
When transmitting a group call, the icon to the right will be displayed.
A call can be made as follows:
1. Through the Contact menu:
a. Go to the ‘Contact’ menu.
b. Use the
▲
and
▼
keys to select the contact you wish to call.
c. Press the PTT key to transmit the call.
2. Through manually dialling the number.
a. Use the keypad to enter the subscriber UID, TGID or dialstring number
required and then press the # key.
b. Press the PTT key to transmit the call.
5.9. RECEIVING A CALL
The Speaker Icon will be displayed when a valid signal is being
received and audio will be heard at the Loudspeaker.
The speaker icon will be shown as an outline when a signal is being received that is not
addressing this radio and hence, is not audible. For instance, another user group may
be having a conversation on another talk group when receiving in Selective Mute.
When receiving a private call, the icon to the right will be displayed.
When receiving a group call, the icon to the right will be displayed.
When receiving a call, press the PTT key within the preset time period to call back.
5.10. SCAN/VOTING FUNCTIONS
The Scan Function allows the sequential searching of up to 16 channels, if the selected
zone channel is programmed as a Scan channel, for a valid signal (C CTCSS/DCS
tone for Analogue FM or Colour Code for DMR). When found, the radio will stop on
that channel until the signal disappears again.
Doc Number:
TNM-U-E-0114 ISSUE 1.4
Page
44