7. Once the IP address has been selected the IP Configuration Tool main screen
will be displayed.
8. Refer to the IP Configuration Tool User Manual [3] and configure the IP Address
for the relevant MAC Address listed in the data grid of the main screen in
accordance with Section 2.2 – Configuring an IP Address.
CONFIGURING THE DMR BASE
9. On the PC, establish a connection with the Simoco Wireless Solutions Portal.
10. When logged in the select the ‘Software Downloads’ > ‘DMR’ > ‘Simoco Wireless
Solutions Xd Infrastructure’ page. A table of all the Simoco Wireless Solutions
Xd Infrastructure software will be displayed.
11. On the Simoco Wireless Solutions Xd Infrastructure page, ensure that you have
the latest version of the ‘DMR Tier III’ > ‘DMR Base’ software. If necessary,
download the latest software to the PC.
Note.
The versions of DMR Base software listed and available on the Portal contain two
software files. These are the Cerebral Platform software and the Application
software. The files are in the form CerebralPlatform_R.X.X.X.tar.gz and DMRT3_
RX.X.X.tar.gz, where RX.X.X refers to the version of software released in each case.
12. On the PC, start and login to the SDMT. On the ‘System Selector’ screen, ensure
that the system that includes the new base station is selected. (Refer to Para
2.3 of Section 2.2 – Configuring an IP Address in the IP Configuration Tool User
Manual [3] for clarification.
13. On the SDMT main screen, carry out the following:
a. On the ribbon bar, select the DMR Tier II tab.
b. On the Site View tab of the Navigation Pane, from the navigation tree,
click on the ‘System’ branch to expand it. Click on the ‘Site 1’ node
displayed.
c. On the DMR Tier II ribbon bar, select the ‘Add Digital Base’ button to add
a digital base to Site 1 on the navigation tree.
d. On the Site View tab of the Navigation Pane, from the navigation tree,
select the new DMR Base that has just been added to the navigation
tree. The Base configuration page will be displayed in the configuration
page area.
e. On the base Configuration page on the Base Settings tab, set the ‘IP
Address’ to that of the new Tier III base station noted in Para 1 or that
sent to the base with the IP Configuration tool as appropriate.
f. On the tab of the base configuration page, select the save icon the
changes that have been made to the configuration page will now be
saved.
Doc Number:
TNM-I-E-0041 Revision 1.6
Page
49
