Simfer 7631 S, Руководство по обслуживанию

Страница: 12 / 66

Installation of the Hanger Plate to the Hood
Secure 2 (two) hanger plates provided with the installation accessories to the
hood with 1 tightening nut screw as shown in Figure 1. Ensure that the
hanger plates are secured in their seats.
Installation of the Hanger Plate to the Wall
Drive 8 mm dowels to the holes (A, B, C) drilled as per the installation
template. Secure the hanger plate to the wall using 2 chipboard screws as
shown in Figure 2.
Installation Template
Figure 2 Figure 1
Installation of the Inner Flue Hanger Plate
Drill 2 securing holes on the wall at a suitable height and at required locations
using a Ø6mm drill to secure the inner flue hanger plate. Drive 6 mm dowels to
these holes and secure the inner flue hanger plate. At the end of the installation
of the hood, screw the inner flue to the hanger plate from the corresponding
points.