User manual for Digital Indicator and cooperating software
In the central part of the tab (in a separated panel) there are fields for configuring device
parameters. The parameters can be configured in three modes. Detailed description of
individual parameters can be found in the user manual for device
•
The „
°
” (degree) sign can be entered by pressing the „
~
”
key on the keyboard.
•
The content of the list, depends on the type of device being configured.
3.2.
“LOGGING SETUP”
TAB
The tab contains three sections:
•
Recording
- in this section check the fields corresponding to active channels,
which are to be recorded. If the selected channel is to be inactive
the command to record from this channel will have no effect;
•
Averaging
- in this section check the fields corresponding to active channels
of the device, for which averaged data are to be recorded instead of
momentary data.
•
Logging options
- in this section define recording-related parameters for all
recorded measurement channels of the device.
•
”
Logging setup
” tab is available for devices equipped with data logging
function,
•
detailed description of individual parameters can be found in the user manual for
data logger.
Fig. 3.3.
Logging setup
tab options
48
Selection of recorded channels
Selection of averaging for channels
Defining logging options
i
i
