Simex SRP-73-XC, Руководство пользователя

Страница: 27 / 48

User manual - METER SRP-73-XC
”on” - control for selected relay is on, the display will change its colour after
selected relay becomes active.
“C AL”
- control the display colour according to alarm situations :
”oFF” - control is off,
”on” - control is on, the display will change its colour after alarm situation occurs.
“C Pr” - this setting enables additional threshold for display colour controlling, detailed
conditions of this control are defined by „
dir
”, „
SEtP
” and „
HySt
” parameters of
„ CoL ” submenu.
”oFF”
- no additional threshold.
”on” - additional threshold enabled, the display will change its colour after result
satisfy conditions defined by „
dir ”, „ SEtP ” and „ HySt ” parameters of „ CoL ”
submenu.
“dir”
- this parameter defines the direction of result changes activating change of display
colour:
”morE”
- display will change its colour after the result is higher than
thrhysteresis
”LESS” - display will change its colour after the result is lower than
thr hysteresis
“SEtP” - additional threshold value (range -999 ÷ 9999 ). Negative values can be input by
selecting a “-” sign on first digit ( to change value use
[^] and [v] buttons).
Threshold is the medium value of relay hysteresis.
“HYSt”
- Hysteresis of colour indication (range 0 ÷ 999). Full hysteresis is equal to 2x
“HYSt”
parameter. The display colour can change when an input signal is out of
threshold-hysteresis to thhysteresis zone.
Presented parameters should be set to ensure that ” SEtP ” + ” HYSt ” and
” SEtP ” - ” HYSt ” do not exceeds the measure range.
“CrES” - permission to use any local key to acknowledgement of display colour change.
Acknowledgement causes clear of all events generating display colour changes (to
active colour), and restores basic colour of the display.
”oFF” - acknowledgement disabled,
”on” - acknowledgement enabled.
7.3.5. ”HOLd” menu
This menu contains parameters connected with peak detection function. See also full
description of the peak detection function in paragraph: DETECTION OF THE PEAK VALUES
27
i