Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 17 / 60

17
7 Delivery and unloading
The machine is normally transported and delivered securely fastened to a pallet, in a stable position, and duly
wrapped in plastic sheeting. The type of packing, though, may vary according to the desired means of
transport and the destination. For carriage by air, the machine is packed inside a suitable wooden crate. All
the equipment despatched is checked prior to delivery to the customer.

On receipt of the machine, check it for any damage (major breakages or dents) caused during
transportation. If any are found, the carrier must be alerted immediately and the statement
“Accepted conditionally” must be added to the delivery note.
In the event of damage, give notice of the fact to the carrier in writing within 8 days of receipt of the
machine.
If, upon delivery, major damage caused during transportation is noted, or any parts that should be
included are found to be missing, SIMEX s.r.l. must be notified of the situation promptly.
It is also essential to check the equipment delivered against the information given in the itemised
shipping document.
The packed unit must be unloaded with the utmost care using lifting means with a suitable
capacity (e.g. fork lift truck or other appropriate means).
Next, the entire unit must be placed on a flat, stable surface.
All load handling operations must be carried out in compliance with the regulations in force
concerning safety in the workplace.
Dispose of the packing in compliance with the regulations in force in the country of use; do not
fly tip it.