Sime SIME SUB HE/DHW 12/60, Инструкции по установке, Страница: 12 / 30

14
The heat counter is equipped with a liquid crystal display, 8 fi gures and special letters.
There are three information “levels” as follows:
a) Main level •
b) Technical level •
c) Static level •
The information is recalled by pressed the button. A short press of the button will step
through the information at each level. Holding the button presseed will move through the
levels.
After 1 minute of non-use, the display returns back to the standard display.
Display
Level
Level
1) Energy used in MWh – standard
display
2) Test of the display. Make sure
all the display sections are displayed
simoultaneously.
3) Value reading at a fixed date.* The
value is displayed by turn with the
actual date
Level
Level
3) Value reading at a fixed date.*
The value alternates with the actual
date
4) Total voilume (in m3) from the
installation
5) Instantaneous power in KW
6) Instantaneous flow rate in m3/h
7) Date
8) Error code
1) Maximum power in kW
2) Maximum capacity in m 3 /h
3) Input temperature in °C
4) Output temperatures in °C
5) Temperatures difference
6) Days of functioning from calibra-
tion
7) Impulses values per litre
8) M-bus address
9) Serial number
10) Firmware/software version
1) Last reading alternated with the
respective date
2 – 16) Consumption reading in the previous 15
months alternated with the respective date*
* Up to the end of the month, the consumption data and the date are displayed at zero
Fig. 5