Sime RMG 100 P, Инструкции по установке

Страница: 44 / 52

pilot.burner.to.the.support.bracket
-..Remove. the. spark. plug. and. the.
interrupted.thermocouple
-..Loosen. the. fitting. that. secures. the.
gas.pipe.to.the.pilot
-..Replace.the.pilot.nozzle
-..Reassemble.the.parts.removed.
4.4 GAS CONVERSION (fig. 11/b)
To. convert. to. butane. gas. (G30). or.
propane. gas. (G31),. replace. the. main.
nozzles. and. the. pilot. nozzle. with. the.
one.provided.in.the.conversion.kit.
The.kit.is.fitted.with.a.plate.to.assem-
ble.in.place.of.the.pressure.regulator.
Adjust. the. pressure. to. the. burner. to.
300. mm. H
2
O. acting. on. the. pressure.
regulator.external.to.the.boiler.
After.have.ultimated.the.conversion.of.
the.boiler,.please.stick.onto.the.casing.
panel. the. plate. showing. the. relevant.
feeding.gas.which.is.included.into.the.
conversion.kit.
NOTE: After assembling all the gas
connections, a test for gas tightness
must be carried out using soapy
water or special products. Do not
use naked flames. The conversion
to different gas must be carried out
exclusively by authorized technical
personnel.
4.5 SHELL DISASSEMBLY (fig. 12)
Follow. the. steps. described. below. to.
disassemble.the.shell.(fig..12):
–. Remove. the. shell. door. (1). which. is.
attached.with.pressure.fit.pins.
–. To.remove.the.cover.(3).loosen.the.
two.screws.that.attach.it.to.the.flue.
gas.chamber.and.lift.
–. Remove.the.top.front.panel.(2).pla-
cing.it.against.the.flue.gas.chamber.
–. Disassemble. the. left. side. (4).
unscrewing.the.nuts.that.attach.it.to.
the.tie.rods.
–. Do.the.same.operation.to.disassem-
ble.the.right.side.(5).
–. Remove.the.inner.wall.(6).by.pulling.
it.forward.
–. Unscrew. the. nuts. that. secure. the.
rear. wall. (7). to. remove. it. from. the.
tie.rods.
4.6 CLEANING AND
MAINTENANCE
At.the.end.of.each.heating.season,.it.is.
essential.to.have.the.boiler.thoroughly.
checked.and.cleaned.out..Proceed.as.
44
FR
EN
Fig..12
Fig..11/b
LEGENDE
. 1. Long.screw
. 2. Pressure.regulator
. 3. Rubber.gasket
. 4. Cork.gasket
. 5. Plate
. 6. Short.screw
REMOVE