Sime 8115101, Инструкция для пользователя, по установке и обслуживанию, Страница: 11 / 80

11
1.3.3 Heating
– Turn the encoder to select
“Heating”
(Heating)
– press the click encoder to confirm “Heating” (Heating) and
open the submenu
“Zone”
(Zones)
Heating
Zone 1 [...]
Zone 2 [...]
Summer Winter Off
Hot water MAN 40
°C
Heating
Esc
Fig. 10
– turn the encoder to select the desired zone e.g. Zone 1
(Zone 1) or Zone 2 (Zone 2)
– press the click encoder to confirm the highlighted zone and
go to the row
Zone 1
Information [...]
Settings [...]
Config [...]
Fig. 11
Turn the encoder until selecting the desired function, e.g.
Settings
Zone 1
Information [...]
Settings [...]
Config [...]
Fig. 12
– press the click encoder to confirm the selected submenu
and access the relevant data display
Room 1 - Settings
Function Mode AUTO
Set AUTO comfort 20.5°C
Set AUTO reduced 17.0°C
Set MAN 19.2°C
Program. Time [...]
Fig. 13
– press the
click
encoder to confirm the highlighted “Row” and
access the modifiable area
Room 1 - Settings
Function Mode AUTO
Set AUTO comfort 20.5°C
Set AUTO reduced 17.0°C
Set MAN 19.2°C
Program. Time [...]
Fig. 14
– turn the encoder to modify the “Data/value” in the per-
mitted field (e.g. OFF - ECO - MAN - AUTO)
– press the
click
encoder to confirm any modifications made
and go back to the row “Function mode” (Function Mode).
m
CAUTION
For information on boiler time programming, see “
Time Programming ”.
m
CAUTION
The settings described above must be done for both
zones.