SimCom SIM548C HD V1.01 Скачать руководство пользователя страница 14

Страница: 14 / 93

SIM548C Hardware Design

2 Overview

Designed for global market, SIM548C is a GSM/GPRS and GPS module. SIM548C with a

Quad-band GSM/GPRS engine works on frequencies EGSM 900 MHz/DCS 1800 MHz and

GSM850 MHz/PCS 1900 MHz. SIM548C also supports GPS technology for satellite navigation.

SIM548C provides GPRS multi-slot class10 / class 8 (option) capabilities and supports the GPRS

coding schemes CS-1, CS-2, CS-3 and CS-4.

With a tiny configuration of 50mm x 33mm x 8.8mm, SIM548C can meet almost all the space

requirement in your application, such as smart phone, PDA phone, GPS hand-held device and

other mobile device, or applications of AVL (Automated Vehicle Location), location service and

so on.

The physical interface to the mobile application is an 60-pin board-to-board connector, which

provides all hardware interfaces between the module and customers’ boards except the RF antenna

interface.

The SPI display interface will give you the flexibility to develop customized applications.

One serial GSM port and two serial GPS pots can help you easily develop your applications.

Two audio channels include two microphones inputs and two speakers’ outputs. These can be

easily configured by AT command.

Charge interface

With the charge circuit integrated inside the SIM548C, it is very suitable for the battery power

application.

SIM548C provides GSM RF antenna interface with alternatives: antenna connector and antenna

pad. The antenna connector is MURATA MM9329-2700 RA1. And customer’s antenna can be

soldered to the antenna pad. A separate GPS antenna must be connected to the GPS part of the

module in order to properly receive satellite data.

The SIM548C is designed with power saving technique, so that the current consumption of GSM

part maintains is as low as about 3mA in SLEEP mode.

The SIM548C is integrated with the TCP/IP protocol, extended TCP/IP AT commands are

developed for customers to use the TCP/IP protocol easily, which is very useful for those data

transfer applications.

SIM548C_HD_V1.01

09.05.2008

Содержание SIM548C HD V1.01






























































































Результаты поиска

Содержание SIM548C HD V1.01

Отзывы:

Бренды по названию

Популярные бренды

SimCom SIM548C HD V1.01, Проектирование аппаратного обеспечения

Результаты поиска

Содержание SIM548C HD V1.01

Отзывы:

Бренды по названию

Популярные бренды