Simco-Ion scorpION3 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 56

Simco-Ion scorpION3 Скачать руководство пользователя страница 40

scorpION3 5200969 Rev 4

35

4.4 System Diagnostics

System diagnostics are available through the Man Machine
Interface (MMI) and the Computer Interface (CI). Diagnostic
information available includes the operating parameters the bar has
been set to, the value the bar is operating at and if any fault status
exists (a fault status is typically when the operating value is
consistently unable to achieve set operating parameter).

The system diagnostics can be accessed through the MMI by wired
or IR communication with the scorpION3 bar. When the diagnostic
menus are entered, the MMI downloads settings and operating data
from the bar. This information is displayed in a series of menus on
the MMI. A further description of this information is available in the
MMI section of this instruction manual and in the appendix.

System diagnostics are also available through the Computer
Interface. The computer interface offers continuous monitoring of
the bar system and display of diagnostic information. This
information is available on various screens presented via the host
personal computer. A further description of this information is
available in the Computer Interface section of this instruction
manual and in the appendix.

«
...
38
39
40
41
42
...
»

Содержание scorpION3

























































Отзывы:

Нет отзывов