background image

70

SIMADO GDT11 System Manual

Warranty Statement

Matrix Comsec Pvt. Ltd. (Matrix) warrants to its consumer purchaser any of its products to be free of defects in 
material, workmanship and performance for a period of 15 months from date of manufacturing or 12 months 
from the date of installation which ever is earlier.

During this warranty period, Matrix will at its option, repair or replace the product at no additional charge if the 
product is found to have manufacturing defect. Any replacement product or part/s may be furnished on an 
exchange basis, which shall be new or like-new, provided that it has functionality at least equal to that of the 
product, being replaced. All replacement parts and products will be the property of Matrix. Parts repaired or 
replaced will be under warranty throughout the remainder of the original warranty period only.

This limited warranty does not apply to:
1. Products that have been subjected to abuse, accident, natural disaster, misuse, modification, tampering, 

faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the 
documentation for the product or if the model or serial number has been altered, tampered with, defaced or 
removed.

2. Products which have been damaged by lightning storms, water or power surges or which have been 

neglected, altered, used for a purpose other than the one for which they were manufactured, repaired by 
customer or any party without Matrix’s written authorization or used in any manner inconsistent with Matrix’s 
instructions.

3. Products received improperly packed or physically damaged. 
4. Products damaged due to operation of product outside the products’ specifications or use without designated 

protections.

Warranty valid only if:

Primary protection on all the ports provided.

Mains supply is within limit and protected.

Environment conditions are maintained as per the product specifications.

Warranty Card:

When the product is installed, please return the warranty card with:

Date, signature and stamp of the customer

Date, signature and stamp of the channel partner

Matrix assumes that the customer agrees with the warranty terms even when the warranty card is not signed 
and returned as suggested.

The Purchaser shall have to bear shipping charges for sending product to Matrix for testing/rectification. The 
product shall be shipped to the Purchaser at no-charge if the material is found to be under warranty. The 
Purchaser shall have to either insure the product or assume liability for loss or damage during transit. 

Matrix reserves the right to waive off or make any changes in its warranty policy without giving any notice.

If Matrix is unable to repair or replace, as applicable, a defective product which is covered by Matrix warranty, 
Matrix shall, within a reasonable time after being notified of the defect, refund the purchase price of the product 
provided the consumer/purchaser returns the product to Matrix.

In no event will Matrix be liable for any damages including lost profits, lost business, lost savings, downtime or 
delay, labor, repair or material cost, injury to person, property or other incidental or consequential damages 
arising out of use of or inability to use such product, even if Matrix has been advised of the possibility of such 
damages or losses or for any claim by any other party.

Содержание GDT11









































































Отзывы: