StreamCaster MIMO Radio User Manual
4/30/19
10017C000
Silvus Technologies Confidential
Page
123
5.2.3
Network-wide Setup
Using the network-wide setup users can configure key parameters of every node in the network
with just one click. Users simply need to check off the parameters they wish to be updated across
the network and click on
Apply
to apply but not write new values to flash or
Save and Apply
to
apply and save values to flash
.
The
Broadcast Update Interval
field determines how often, in
seconds, the new parameters will be broadcast to the entire network. A list of all nodes will
appear on the right with a check box next to each node. This box will be checked off as each node
receives the update.
Figure 64 Network-wide Setup
