Silvio Assembly Manual
Page 1
Silvio V2.0 Assembly Instructions
SilvioAssemblyNotesV5.0
1. General Safety Information
WARNING – to avoid serious injuries:
1. If you are unsure about fitting, testing and adjusting
brakes or gearing on a bicycle, you should take
your bicycle to a professional bicycle mechanic for
adjustment. Improperly adjusted brakes or drivetrain
components could cause severe injury or death.
2. If you are unsure of the frame assembly instructions,
you should take your bicycle to a professional bicycle
mechanic for assembly. An improperly assembled
frame could cause severe injury or death.
3. After adjusting the position of the crank to fit the
rider, ensure the front (flexible) chainstay is straight,
not held in a curved position. An improperly adjusted
frame could be damaged by riding and cause severe
injury or death.
Assembly
This instruction set describes the assembly sequence
but there may be minor differences in specification of
your model.
Adjust to the rider
Adjust to the rider,
before
fitting brake and gear cables.
Sight along the Front Chainstay to verify that it is
straight, not held in a curved position.
Important
!
Adding components
Adding components is done to component
manufacturer’s instructions. This document does not
describe how to fit components, however the Silvio
frame provides standard mounting points for standard
road bike components. Adding components can be
easier if you have a bike workstand and the best place
to clamp the frame is on the slider tube.
