~ 3 ~
RAZUR SHARP II
® -
Before you Begin
The following instructions are condensed because you
probably already know how to sharpen square chisel bit saw
chain.
Your Razur Sharp II has been set,
tested, and adjusted before it left Silvey.
The R2 is also shipped with a
Silvey
®
SNO21-H wheel that has been dressed.
Inspect the grinder for damage before you use it.
Rough handling by shippers can result in bent or
broken parts.
Also, check the grinding wheel for cracks and chips. If the wheel is cracked, chipped or out of
balance, it may break apart when you turn the grinder on and could cause injury to you or the
grinder
.
Please:
Read all of the operating instructions thoroughly before you start to use your grinder.
You may contact us directly for additional help.
If you purchased and picked up your Razur Sharp II
®
grinder from a shop, your grinder is
probably assembled and mounted on the stand. If you ordered your Razur Sharp II
®
and had
it sent to you, this section will be helpful.
RAZUR SHARP II
®
-
Unpacking & Assembling the Grinder
Open the top of the box -
DO NOT
destroy it. You may need to use the
box and
packing materials in the future. For example, if you need to
send it in for repairs or to be rebuilt.
In the shipping box there was:
Razur Sharp II grinder
Instructions
1) Stand Base #261-T
3) Stand Legs #263-T
Bolt Bag: 1) Stand Mount Bolt # 258-T
1) Stand Height Adjustment Bolt # 259-T
6) Leg Bolts # 260-T
Larger view of stand on page 14.
The Stand Extension Pole was shipped in a separate box.
