CPLT1884E-AI-V1
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
• Bulbs get hot quickly! When replacing the bulb, turn off or unplug the lamp and wait until it is cool.
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
• If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, please contact a
qualified electrician.
• Never use with an extension cord unless the plug can be fully inserted.
• Do not alter the plug.
NOTE:
The safety instructions appearing in this manual are not meant to cover all possible conditions
that may occur. It must be understood that common sense, caution, and care must be used with any
electrical products.
** Do not use power tools in assembly.
** Follow the instructions on the warning label
(caution label) inside the lamp shade to ensure
maximum safety.
** Keep all small parts away from children.
** Use only the parts and tools noted in these instructions.
** Failure to follow assembly instructions may void any
applicable warranties.
**
CLEANING:
Wipe with a soft cloth. NEVER use
harsh chemicals or abrasive cleaners for polishing.
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.
Please contact our dedicated customer service team at 1-800-737-5267 or email [email protected] to
request parts or assistance with your merchandise. Office hours: Monday - Friday from 8:00 AM - 5:00 PM - (Central Time Zone)
RATTAN JUG TABLE LAMP
ITEM# CPLT1884E
050277006649
UPC #
ASSEMBLY INSTRUCTIONS
D
C
B
A
E
F
G
LED Bulb 10W Maximum
(7W LED included)
Use only with
a self-ballasted
CFL 13W max
bulb
OR
OR
Standard
Type A 60W
max bulb
1. Carefully remove all parts from box and
remove all plastic covering from lamp parts.
2. Screw the socket assembly (B) into the lamp
base (A) while pulling cord through the base.
3. Attach the harp (D) on the saddle of the socket
assembly (C).
4. Place the shade (E) on the harp (D) and tighten
with finial (F).
5. Screw the bulb (G) into the socket assembly (B).
6. Your lamp is now completely assembled.
7. Please check that all pieces are fully tightened.
