M.2 SSD cooling kit
Double layer design enhances SSD cooling for stability and efficiency
Easy to apply and affix with silicone bands without damaging M.2 SSD
Aluminum alloy heatsink increases M.2 SSD cooling area
Efficient heat conduction pad for reducing temperature
Supports 2280 length M.2 SSD
* Includes two gray colored thermal pads with different thickness. For single sided M.2 SSD (flat back
without component), please use 1.5mm thick pad; for double sided M.2 SSD (both sides with
components), please use 1mm thick pad.
** If one gray pad is not thick enough to make contact with both M.2 SSD and your motherboard
or adapter card, then you should carefully attach both included pads in your TP02-M2 kit together
(make sure to avoid trapping air bubbles between them). Your goal is to create enough thickness
to enable solid contacts so the heat from M.2 SSD can be transferred through to the motherboard
or adapter card
*** If the M.2 slot on the motherboard is situated next to a PCIe slot, the height of the TP02-M2 ‘s
heat sink may interfere with graphic card or expansion card installation, we recommended installing
TP02-M2 onto other available M.2 slots on the motherboard to avoid interference issue.
Specifications
www.silverstonetek.com
TP02-M2
Model No
Material
Color
Thermal pad conductivity
Thermal pad thickness
Operating temperature
M.2 size support
Net Weight and dimension
SST-TP02-M2
Aluminum, silicone
Black
1.5W/m.k
1.0mm, 1.5mm
-20°C ~ 180°C
2280 (22mm x 80mm)
Heatsink : 70mm (W) x 10mm (H) x 20mm (D),16.1g
Blue Pad : 70mm (W) x 1mm (H) x 20mm (D), 3.25g
Gray Pad 1 : 60mm(W) X 1mm(H) X 20mm(D), 2.8g
Gray Pad 2 : 60mm(W) X 1.5mm(H) X 20mm(D),3.7g
1. 파란색 열전도 패드를 방열판의 뒷면에 부착합니다.
2. 방열판을 M.2 SSD에 부착하고 방열판이 M.2 SSD의 양쪽 가장자리에 맞춰 정렬되었는지 확인합니다.
나사 구멍과 커넥터가 덮이지 않았는지 확인합니다.
3. 메인보드 설치 준비로서 실리콘 밴드로 방열판의 반대쪽 가장자리를 감습니다.
4. M.2 SSD를 어댑터에서 사용할 경우 M.2 SSD와 어댑터 사이의 열전도 접촉을 위해 M.2 SSD의 뒷면과
실리콘 밴드 사이에 회색 열전도 패드를 댑니다.
▓
두께가 다른 회색 열전도 패드 두 개가 포함되어 있습니다. 단면 M.2 SSD(구성품을 제외한 평평한 뒷면)의
경우 1.5mm 두께의 패드를 사용하십시오. 양면 M.2 SSD (구성품을 포함한 양면)의 경우 1mm 두께의
패드를 사용하십시오.
▓
실리콘 열전도 패드는 끈적거리기 때문에 접착된 M.2 SSD를 떼어낼 때는 주의해서 천천히 떼어내십시오.
1.ヒートシンク背面にブルーの放熱パッドを貼り付けます。
2.ヒートシンクをM.2 SSDの両端に合わせて貼り付けます。ネジ穴とコネクタを塞がないように気を付けます。
3.シリコンバンドをヒートシンク両端に巻き、マザーボードへの装着に備えます。
4.ご使用のM.2 SSDにアダプタが付いている場合、M.2 SSD背面にグレーの放熱パッドを取り付け、シリコンバ
ンドを巻いてM.2 SSDとアダプタ間での熱伝導を確実にします。
￭ 異なる厚さのグレーの放熱パッドが2枚付属しています。片面M.2 SSD (裏側はコンポーネントなしで平坦)
には1.5mm厚パッドを、両面M.2 SSD (両側にコンポーネントあり)には1mm厚パッドを使用します。
￭ シリコン製放熱パッドは粘着性があるので、貼り付けたM.2 SSDから剥がす際はゆっくり慎重に行ってください。
G11232821
Warranty Information
This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Additional info & contacts
For North America
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of
purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the
“USA RMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply)
For Europe ([email protected])
For all other regions ([email protected])
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com
.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit
http://www.silverstonetek.com
for the latest updates.
Warranty terms & conditions
TP02-M2 heatsink x 1
Gray thermal pad x 2
Blue thermal pad x 1
Silicone band x 2
Manual x1
Packaging contents
部件名称
导热贴
导热鳍片
包材
说明书
多溴二苯醚
(PBDE)
多溴联苯
(PBB)
六价铬
(Cr(VI))
镉
(Cd)
汞
(Hg)
铅
(Pb)
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○：表示该有毒有害物质在该部件所有均质材料中的含量
均在SJ/T11364-2014标准规定的限量要求以下。
×：表示该有毒有害物质在该部件材料中的含量超出
SJ/T11364-2014标准规定的限量要求。
本表中有×的部件均符合欧盟RoHS法规，即欧盟第2011/65/
EU号指令要求。
产品合格证
检验员：检01
生产日期：见产品条码
有毒有害物质/元素及其化学含量表
aging M.2 SSD
