GB
│
MT
│
87
■
SDGS 1630 A1
Crease tool
The supplied crease tool
a
helps you to renew or create creases .
1) Before you switch on the appliance, fully attach the hook on the supplied
crease tool
a
into the mount on the bottom of the steam head
1
(fig . U) .
2) Press the handle to open the crease tool
a
.
3) Place the clothing between the crease tool
a
and the steam head
1
and let
go of the handle .
4) Switch the appliance on and start at the top of the clothing . Slowly move the
crease tool
a
downward (fig . V) .
5) Switch the appliance off, remove the plug from the power socket and allow the
appliance to cool down completely .
6) Detach the crease tool
a
by pulling the hook of the crease tool
a
out of the
mount on the bottom of the steam head
1
.
Protective cover for sensitive fabrics
You should use the supplied protective cover
s
to press sensitive fabrics, such
as silk or velour .
♦
Before you switch on the appliance, pull the protective cover
s
fully over
the steam head
1
.
Protective glove
Wear the protective glove
d
if, for instance, you are steam-ironing the sleeves of
an item of clothing and inserting your hands into the sleeves to stretch the fabric .
You can hold the steam head
1
close to the fabric without burning your hand .
U
V
