Silvercrest SDBS 2400 A1, Руководство по эксплуатации

Страница: 81 / 114

SDBS 2400 A1
■ 78
│
GB
│
MT
Steam ironing
1) Press the On/Off button
t
to turn the appliance on. The indicator lamp
integrated in the On/Off button
t
lights up and the “max” steam indicator
lamp
w
flashes.
2) Turn the temperature control
2
to set the required ironing temperature. The
temperature control
2
must be set to a minimum of to produce steam.
3) The heat-up indicator lamp
3
lights up during heating. As soon as the heat-
up indicator lamp
3
goes out, the set temperature has been reached.
4) Press the steam strength
z
button to set the required steam strength:
–
If the “max” steam indicator lamp
w
is lit up, a lot of steam will be
produced.
–
If the “eco” indicator lamp
q
is lit up, less steam will be produced.
As soon as the “eco”
q
or “max”
w
indicator lamps light up continuously
(depending on the setting) you can start steam ironing.
5) While you are ironing, you can now press and hold the steam button
1
to
continuously spray steam onto the goods to be ironed from the sole of the
iron
6
. Release the steam button
1
to stop producing steam.
NOTE
► When you press the steam button
1
, it can take a few seconds until steam
is issued from the sole of the iron
6
.
6) Put the iron down on the base station placement area
5
after ironing.
Set the temperature control
2
to “min”.
7) Press the On/Off button
t
to turn the appliance off. The indicator lamp
integrated in the On/Off button
t
and the “eco”
q
or “max”
w
steam
indicator lamps (depending on setting) will go out.
8) Disconnect the plug from the mains socket.