background image

GB/IE

Safety

   

Important specific notes on safety

The following notes are for your safety and satisfaction 
in operating the device. Please observe that non-
compliance with these safety notes may lead to 
substantial risks caused by accident.

Explanation of the icons and terminology used.

c

  Danger!

 Avoid risk to life!

m

   

Caution!

 Avoid risk of injury and damage to 

property!

 

Tip!

 What to do!

Danger!

·   Do not allow small children unsupervised near 

the packaging material! Risk of suffocation!

·   Do not allow infants and children unsupervised 

into the vicinity of the device!

·   Protect yourself against an electric shock! 

Avoid any short circuits during connections:

 

-  with the vehicle’s 12 V DC power supply

 

-   with the max. 2 pairs of loudspeakers with 

the impedance 4 - 8 Ohm

 

-  with a CD changer

 

-  with a terminal amplifier

·   Before connecting to the 12 V DC power supply 

of a car, obtain information on how to maintain 
electrical safety based on the vehicle‘s 
operation manual!

·   Ensure that when connecting to a vehicle‘s 

12 V DC power supply, there is no voltage in the 
vehicle‘s connecting cables. Equip the 
connecting cords with fuse holders (3 x 1 A)!

·    When installing into a car, ensure that the vehicle 

is out of operation and in a secure standstill 
position! Turn off the ignition and bring the vehicle 
into parking position with applied hand-brake.

·   Complete the connection to the 12 V DC power 

supply while fully protected against humidity! 

·   Complete the installation in a car, the assembly, 

the maintenance and the service disconnected 
from the 12 V DC power supply!

·   Do not expose the device to moisture, fire, heat 

and sustained temperature in excess of 0° C! 

·   Do not damage any lines carrying fuel or for 

electricity, brakes, hydraulics, water or data 
transfer when tightening the screws!

·   Ensure that the 12 V DC constant current plug-

in 

fm

, the 12 V DC ignition current plug-in 

fo

and possibly the powered aerial plug-in 

fn

 

do not come into contact with a fuel line (e.g. 
petrol-carrying line)! 

·   Do not allow yourself to be distracted while 

driving by operating the car radio or from its 
displays! Familiarise yourself with its operation 
before driving and practise the safe use of the 
car radio’s features! Set the volume only to such 
level that the sirens of emergency vehicles can 
be heard on time.

m

 

Caution!

·   Avoid injuries and damage to the sensitive sense 

of hearing of passengers (in particular infants, 
children and pets) while in the car! Adjust the 
volume and balance of the loudspeakers for all 
passengers to a healthy and comfortable level!

·   Adjust the volume such that you can always 

hear the warning signals of other road users.

·   Before operation, check if all components have 

been assembled in accordance with the operating 
instructions!

·   Before assembly and operation, check the delivery 

for damage and completeness!

·   Use the car radio only with the supplied 

original parts!

·   Do not cover the metal casing 

dt

with objects!

·   Protect all electronic contact areas against 

short circuiting, humidity, damage and impurities!

·   Do not place the device on or near a car battery!
·   Prevent a short circuit and damage! Ensure that 

no alien matter or objects can access the inside!

·   Disconnect the car radio in the event of 

operational malfunctioning and damage 
instantly from the 12 V DC power supply!

·   Connection to the loudspeakers, CD changer, 

amplifier and audio storage devices (CD, CD-R, 
CD-RW, USB memory stick, MP3 player, SD, 
and MMC) must be carried out as described in 
the relevant operating manual.

·   Have the car radio repaired exclusively by 

Safety

KH2380_Content_UK.indd   9

12.09.2006   11:57:10 Uhr

Содержание KH 2380































Отзывы: