- 4 -
Cool level
With the cool level button
❄
u
you can create
a cold air stream with every combination of air and
heat levels.
Ionic Function
With the Ion switch
r
you can additionally switch
in the ionic function with every combination of blower
and heat level combinations.
When drying hair using a "normal" hair dryer, the
hair tends to charge itself with static and then begins
to "fly"..
The ionic function generates negatively charged
ions. These are brought to the hair by the air flow.
Thereby, the positive static charge in the hair is
neutralised and voided. The hair will be soft,
supple, shiny and easier to style.
Drying and styling hair
➪
To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Also, place the ion switch at the
position
r
on “
”. After drying the hair,
switch to a lower blower and heat level to shape
the hairstyle.
With the supplied concentrator
q
you can utilise
the air flow specifically for styling:
• Place the concentrator
q
on the front of the hair
dryer: Ensure that one of the plastic latches on the
concentrator
q
engages into the guide rail on the
hair dryer. Turn the concentrator
q
until it is firmly
seated and clicks into place.
Turn the concentrator
q
in the opposite direction
and pull it away to the front if you want to use
a wider air stream.
If you wish to dry your hair particulary gently, or for
the so-called “air-dryed permanent wave”, use the
finger diffusor
i
.
➪
For this, first of all remove the concentrator
q
and then replace it with the finger diffusor
i
:
• Ensure that one of the plastic latches on the finger
diffusor
i
engages into the guide rail on the
hair dryer. Turn the finger diffusor
i
until it
engages and sits firmly.
➪
Before you comb your hair out allow it to cool,
so that the styling retains its form.
➪
To cool your hair you can use the button
❄
u
or level 1 of the heat setting switch
y
.
Attention!
First pack and transport the hair dryer when it
has completely cooled down.
Otherwise it could damage other items.
Cleaning
Danger of electric shock
ALWAYS remove the plug from the power socket
before cleaning the hair dryer.
Danger of an electrical shock!
After being cleaned, the hair dryer must be
completely dry before using it again.
Cleaning the housing
➪
To clean the housing, use a soft cloth moistened
with a mild soapy solution.
IB_KH2115_46738_LB6 04.03.2010 16:57 Uhr Seite 4
