Silvercrest DGP1000, Руководство пользователя и сервисная информация

Страница: 13 / 80

English
Silvercrest DGP1000
11
Getting started
Proceed as follows to start using your digital pen quickly and easily.
Step 1: Insert the batteries into the digital pen
The warning symbol ( ) on the pen informs you that the batteries must
be inserted with the correct polarity.
Proceed as follows:
1. Unscrew the battery compartment cap (H).
2. Insert two batteries type Varta V392.
The plus pole (+) of both batteries must always
point upwards!
3. Screw the battery compartment cap on again.
Step 2: Fit the ballpoint pen refill
Proceed as follows:
1. Insert a new ballpoint pen refill (F) into the pen
and press it as far as possible into the pen.
Only insert a ballpoint pen refill into the pen
which has the following dimensions:
Length 67 mm; cross-section 2.35 mm
Refills can be obtained from stationery shops -
take your old refill for reference purposes.
A description of how to change the refill when it is empty is given in the
"Troubleshooting" section.