- 42 -
Note:
To release the first steam blast after heating the appli-
ance up, it can happen that you may need to press
the steam blast button
8
several times in succession.
The appliance is now ready for use.
Attention!
The steam brush can be used with all clothing items.
Caution is to be exercised with heat-sensitive materials
such as synthetics, polyamides or artificial silk. With
these materials you should first check at a concealed
part (inside seam) that the hot steam will not cause
any damage to the garment. Do not touch these ma-
terials directly with the hot sole of the iron
0
. Use
only the steam blast.
Clothing care
• Suspend the crumpled garment from a coat hanger.
• With one hand pull the garment flat, then steam it
from top to bottom. The combination of steam and
clothes brush
r
will gently remove all creases.
• Use light pressure with the clothes brush
r
and
guide the appliance from top to bottom over the
garment. You can thereby press the steam blast
button
8
in short intervals.
Note:
You can repeatedly press the steam blast button
8
until the heating-up control lamp
5
glows or water
drips from the sole of the iron
0
.
Then, wait until the heating-up control lamp
5
extin-
guishes before activating a further blast of steam.
• Should the heating-up control lamp
5
start to
glow during the process, release the steam
blast button
8
and wait a few seconds until the
heating-up control lamp
5
extinguishes.
Note:
Should you press the steam blast button
8
whilst
the heating-up control lamp
5
is glowing the result
will be condensed water instead of steam, and water
will drip from the sole of the iron
0
.
• Leave the garment on the clothes hanger to cool
down before putting it on.
Curtain and soft furnishing care
• Creases and wrinkles can be removed from
draperies by hanging them over a pole.
• Then simply follow the directions given under
“Clothing care”.
• Always carry out a test first at a concealed part.
• If you are using the appliance horizontally, every
now and then hold it upright so as to have the
maximum steam performance.
Fluff brush
• Threads, fluff and hairs can be easily removed
with the red fluff brush
e
by slowly brushing
over the garment with it from left to right.
• You can clean the fluff brush
e
by brushing with
it in the opposite direction (from right to left)
over, for example, a remnant of material.
Ironing function
• Dismantle the brush attachment
w
from the
appliance (see “Attaching/detaching the brush
attachment”).
• Connect the appliance to a correctly installed
and earthed mains power socket.
• Adjust the temperature regulator
3
as per the
international point symbols (Care Label) or
the type of material. The heating-up control lamp
5
glows. As soon as the set temperature has
been reached, the heating-up control lamp
5
goes out .
Washing label
Type of
material
Temperature
regulator
3
Chemical fibres,
e.g. viscose,
polyester
•
(low
temperature)
Silk, Wool
••
(medium
temperature)
Cotton, Linen
•••
(high
temperature)
IB_77154_SDRB1000A1_LB2 29.05.2012 8:56 Uhr Seite 42
