SSM 550 D1
■
14
│
GB
If you clean the blender directly after use, you will usually achieve suitably
hygienic cleaning results by using the following method:
1) Fill the blender attachment
with 750 ml of water and add a drop of wash-
ing up liquid. Close the lid
and place the blender attachment
onto the
motor unit
.
2) Plug in the appliance and activate Ice Crush/Clean a couple of times so that
the cutting blades
plough through the water at maximum speed.
3) Afterwards, rinse the blender attachment
with plenty of clear water to
remove any washing up liquid residues.
If this does not remove the dirt, you
can remove the lower plastic part of the
blender attachment
with the cutting
blades
from the glass part of the
blender attachment
:
Glass
part
Sealing
ring
Cutting
blade
Plastic
part
4) Remove the blender attachment
from the motor unit
.
5) Turn the plastic part of the blender
attachment
anticlockwise so that it
can be removed from the glass part
of the blender attachment
.
WARNING –
RISK OF INJURY!
►
Treat the cutting blades /
with
great care. They are extremely sharp!
Risk of injury!
6) Clean both parts in a mild soap solu-
tion or in the dishwasher.
7) Re-attach the plastic part of the
blender attachment
to the glass part
of the blender attachment
. Make
sure the sealing ring is inserted.
Содержание 277069
