Silver Spring SC500-V3 Скачать руководство пользователя страница 1

Deluxe Steel Folding Scooter & Wheelchair Carrier 

Instructions for Part # SC500-V3

Page 1

Rev. 060518

DiscountRamps.com 

 1-888-651-3431

General Guidelines

•  It is the user’s responsibility to read and follow all instructions.
•  Keep these instructions with the product at all times and review before each use.
•  It is the responsibility of this product’s owner to furnish the instructions to any person that borrows 

or purchases the product.

•  Inspect the product before use to ensure it is assembled properly and all parts are in safe working 

order and free of defects.

•  Never modify this product in any way.
•  All circumstances cannot be addressed in these instructions.  Please use common sense and 

practice general safety measures when using this product.

•  Parts and/or instructions are subject to change without notice.

Safety

•  Follow all warnings and instructions marked on the product.
•  Do not occupy the mobility aid while loading the carrier.
•  Do not stand on the carrier.
•  Never exceed vehicle tongue weight rating.
•  The carrying capacity is 500 lbs.
• 

Hitch adapters may affect the weight capacity of the carrier. If using a hitch adapter, always check 

its limitations before use.

•  Always store the carrier in a safe place.
• 

Improper use, storage, or installation of the carrier could result in death or serious injury.

•  Do not put the product on any kind of trailer.
•  NOT recommended for tow-behind trailers including 5th wheel trailers and camping trailers.
•  Periodically check nuts and bolts for tightness.

Tools Required

•  17mm wrench
•  13mm or 1/2" wrench
•  19mm or 3/4" wrench

•  7/8" or 22mm wrench
•  Phillips screwdriver
•  10mm Allen wrench

Содержание SC500-V3









Отзывы: