background image

Congratulations on your purchase of a SILVA LaserMaster™!

LaserMaster™ is the perfect aid for creating or fi nding 

boundaries/lines in the terrain. 

LaserMaster™ works equally well in the woods as in open 

terrain and provides exact bearings thanks to the laser unit 

indicating where in the terrain the selected bearing runs.  

NOTE: LaserMaster™ contains a laser unit. Improper use can 

lead to injury! Thoroughly read the safety guidelines at the 

end of this manual.

LaserMaster™ consists of a precision-aiming compass 

combined with a precision alignment laser unit that generates 

a red dot in the line-of-sight path. Accompanying equipment 

includes a course protractor for exact determination of the 

boundary bearing on the property/inventory map as well as a 

refl ective vest that not only effectively refl ects the laser dot 

while the bearer walks off the boundaries but also makes use 

possible in strong daylight/sunlight. 

LaserMaster™ is primarily intended for use by two persons, 

where the front person wears the refl ective vest and is 

guided by the person sighting with LaserMaster™ in the 

direction of the boundary. This allows the front person to 

concentrate on such tasks as fi nding boundary stones while 

walking in the precise direction. The rear person concentrates 

on guiding the front person with the help of the laser dot on 

the large refl ective surface of the vest. The method is simple, 

quick and highly effective!

Instrument usage

LaserMaster™ should be held horizontal when used. When using the sight for aiming, it is often simplest to use both eyes (one 

eye looking through the sight, the other looking along the side of the instrument, see Fig. 1) to easily see the laser dot while 

reading off the correct setting on the compass scale. Some people have a problem with diffraction that may make the laser dot 

appear to move in relation to the guideline in the sight when using both eyes. If this is the case, use only one eye when aiming. 

Position the instrument so that you can read the compass heading on the scale while viewing the laser dot above the instrument 

body.

NOTE: The built-in compass of the LaserMaster™ is affected by magnetic objects. For the best possible accuracy, remember to 

keep helmets, weapons, metallic eyeglass frames and the like away from the vicinity of the instrument when it is in use.

Fig. 1

Precision compass capsule

Optical aiming system

Index line for 

direct reading

Laser unit for accurate bearing 

demarcation in terrain

Non-magnetic 

aluminium housing

Battery compartment for 3 

SR44 batteries (included)

On/Off button 

for laser unit

Содержание LaserMaster

Страница 1: ... boundary stones while walking in the precise direction The rear person concentrates on guiding the front person with the help of the laser dot on the large reflective surface of the vest The method is simple quick and highly effective Instrument usage LaserMaster should be held horizontal when used When using the sight for aiming it is often simplest to use both eyes one eye looking through the s...

Страница 2: ... NOTE Select a scale based on in which direction the boundary extends If it goes in a southeast direction use the scale marked SO If it goes in a northeast direction use the scale marked NO etc 5 Note the desired boundary bearing 6 Magnetic declination which is normally specified on the map must be taken into consideration to ensure bearings are accurately obtained If no declination is specified t...

Страница 3: ...came to check the compass direction along which the boundary runs This is read from the small scale in the instrument sight If this value differs from the measured value and if the map indicates the boundary should be straight it is probably the most recently read compass bearing that is correct and should be used when continuing the search for more boundary markers Do as follows to move a boundar...

Страница 4: ...Voltage 4 5 Volt Output 1mW Batteries 3 SR44 included Weight 300 g Dimensions 170 x 53 x 16 mm Laser CE approved DC91107 in accordance with test standard EN60950 EN60825 1 IMPORTANT Information on the laser unit in LaserMaster Do not attempt to remove the laser unit at the front of the instrument on your own The built in laser unit contains a class 2 laser Never look into the laser beam this could...

Отзывы:

Похожие инструкции для LaserMaster