SillyComm VoltBolt, Руководство пользователя

Страница: 11 / 45

VoltBot User Manual
11
key again. (Old code cleared and new code are ready).
5. Select a channel, touch 1 for example
6. Choose mode for channel 1, touch 2
7. Choose the voltage, touch 3 for 5V
8. Use the USB-to-DC cable to connect Port 1 and the Arduino board.
5. Connect VoltBot with a Web-browser
Here is a demo to turn Channel 1 into DC output of 9v, and then restore Channel 1 back
into quick charge model.
1. Power on VoltBot.
2. Search the WiFi hotspot list of your phone, find one named with “VoltBot”.
3. Join it.
4. Check the IP you got. (if you don’t know how, google “What is my iPhone's IP?”)
5. You probably see the IP is 1.1.1.X or 10.1.1.X.
6. Open the web browser on your phone (Safari).
7. Type in http://1.1.1.1 or http://10.1.1.1. It depends on the result by replacing X with 1 in
the IP of step 5. Then press “Go” open this address.