Silis Electronique CHAUFFAGE SMS V2, Руководство пользователя, Страница: 16 / 25

4-3-2 D
ESCRIPTION OF
SMS R
ECEIVED BY THE USER
SMS Examples Description
Config OK
Admin : +33xxxxxxxxx
Warning, no probe
Config OK
Admin : +33612345678
Warning, no probe
­
The administrator receives this message after the configuration of device.
If no probe is detected on the input sensor, you receive this alert: “
Warning, no probe. ”
ERR Config ERR Config
­
The administrator receives this message when the product configuration was not well performed
New Admin :
+33xxxxxxxxx
New Admin : +33612345678
­
When the administrator changes is received by the old and the new administrator, with+ 33xxxxxxxxx as the
phone number of the new administrator
Adding the user :
+33xxxxxxxxx
Adding the user : +33612345679
­
The administrator receives this message after adding a new user. The new user also receives this message.
Error : not add a third
user
Error : not add a third user
­
The administrator receives this message if he tried to add a third user
Invalid Phone Number Invalid Phone Number
­
The administrator receives this message if the entered phone number does not begin with +33 or/and if the
next 9 characters are not numbers.
Deleting the user :
+33xxxxxxxxx
Deleting the user : +33612345679
­
The administrator receives this message after deleting a new user.
User 1 : +33xxxxxxxxx
User 2 : +33xxxxxxxxx User 1 : +33633863675
User 2 : +33633863675
­
The administrator receives this message as answer to the “ USERS? ” command.
Language ENGLISH Language ENGLISH
­
Confirmation of the language selection
Setpoint : XX Setpoint : 16
­
The administrator receives this message after setting up the temperature setpoint.
Invalid setpoint Invalid setpoint
­
The administrator receives this message if the temperature setpoint if lower than 6 or greater than 20
Output 2 ON Output 2 ON
­
Confirmation of the switch-on device connected to the output 2
Output 2 OFF Output 2 OFF
­
Confirmation of the switch-off device connected to the output 2
Output 2 in mode
heating zone
Output 2 in mode
heating zone
­
Confirmation of the passage in heating zone mode of the output 2
Heating : XXXX
Setpoint : XX
Temperature : XX
Output 2 : XXXX
Alarm1 XX
Alarm2 XX
Batteries XX
Heating : ECO
Setpoint : 16
Temperature : 19
Output 2 : Electrical device ON
ALARM 1 DETECTED
No alarm 2
Batteries OK
­
Indication of the current mode ( PRESENT or ECO ), the value of the temperature setpoint (°C), the value of
the current temperature (if no sensor is connected you will have the message: « Warning, no probe »), the
current setting of the output 2 ( Heating zone, Electrical device ON or Electrical device OFF) .
You will also have the state of the 2 alarms inputs (ALARM 1 DETECTED or No alarm 1, ALARM 2
DETECTED or No alarm 2) and then the current batteries (Low batteries or Batteries OK) .
­
This message is send as 2 SMS
Heating : PRESENT Heating : PRESENT
­
Confirmation of the passage in PRESENT mode
Heating : ECO Heating : ECO
­
Confirmation of the passage in ECO mode
Invalid command or
unauthorized control
Invalid command or unauthorized
control
­
This message is received when a wrong command (or an unauthorized order) has been sent
16