Silicon Laboratories SI5324 Скачать руководство пользователя | Manualshive

Страница: 60 / 61

background image

S i 5 3 2 4

60

Preliminary Rev. 0.3

C

ONTACT

I

NFORMATION

Silicon Laboratories Inc.

400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032

Please visit the Silicon Labs Technical Support web page:

https://www.silabs.com/support/pages/contacttechnicalsupport.aspx

and register to submit a technical support request.

Silicon Laboratories, Silicon Labs, and DSPLL are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.

The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.

«
...
58
59
60
61
»

Содержание SI5324






























































Отзывы:

Нет отзывов

Похожие инструкции для SI5324

Бренд: MAINSPRING Страницы: 12

Бренд: Uniel Страницы: 2

Бренд: Kompernass Страницы: 3

Бренд: Lathem Страницы: 50

Бренд: Majestic Страницы: 16

Бренд: NATURE & DECOUVERTES Страницы: 9

Бренд: Tokai Страницы: 42

Бренд: La Crosse Technology Страницы: 10

Бренд: La Crosse Technology Страницы: 5

Бренд: La Crosse Technology Страницы: 10

Бренд: Hama Страницы: 9

Бренд: Hama Страницы: 36

Бренд: Geemarc Страницы: 32

ALCDVR32-SL V1.0

Бренд: COP-USA Страницы: 12

Бренд: Naxa Страницы: 13

Бренд: VIA Technologies Страницы: 16

Бренд: Gorgy Timing Страницы: 57

Бренд: Well Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды