
11.4 ISEDC
ISEDC
This radio transmitter (IC: 5123A-11) has been approved by Industry Canada to operate with the embedded chip antenna. Other anten-
na types are strictly prohibited for use with this device.
This device complies with Industry Canada’s license-exempt RSS standards. Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device
RF Exposure Statement
BGM11S modules has been tested for worst case RF exposure. As demonstrated in the SAR test report,BGM11S can be mounted in
touch with human body without further SAR evaluation.
OEM Responsibilities to comply with IC Regulations
The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter.
OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module instal-
led (for example, digital device emissions, PC peripheral requirements, etc.).
Important note
In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the IC authori-
zation is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization
End Product Labeling
The BGM11S module is labeled with its own IC ID. If the IC ID is not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final
end product must be labeled in a visible area with the following:
“
Contains Transmitter Module IC: 5123A-11
”
or
“
Contains IC: 5123A-11”
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or
change RF related parameters in the user manual of the end product
ISEDC (Français)
To be added.
BGM11S Blue Gecko
Bluetooth
®
SiP Module Data Sheet
Certifications
silabs.com
| Building a more connected world.
Rev. 1.0 | 91