manualshive.com logo in svg

Silicon Graphics Origin 3900, Руководство пользователя, Страница: 23 / 292

Поделиться
Скачать
Silicon Graphics Origin 3900 Скачать руководство пользователя страница 23

Related Publications

007-4653-001

xxiii

•

Appendix A, “Technical Specifications and Pinouts‚" provides physical,
environmental, and power specifications for your server. Also included are the
pinouts for the non-proprietary connectors.

•

Appendix B, “Safety Information and Regulatory Specifications‚" lists all regulatory
information related to use of the SGI Origin 3900 server in the United States and
other countries. It also provides a list of safety instructions to follow when
installing, operating, or servicing your server.

Related Publications

The following SGI documents are relevant to the SGI Origin 3900 server:

•

SGI Total Performance 900 Storage System User’s Guide
(P/N 007-4428-

xxx

)

This fully illustrated guide explains how to operate and maintain the SGI Total
Performance 900 (TP900) SCSI storage system.

•

SGI Total Performance 9100 (2Gb TP9100) Storage System User’s Guide
(P/N 007-4522-

xxx

)

This fully illustrated guide explains how to operate and maintain the 2Gb SGI Total
Performance 9100 Fibre Channel storage system.

•

SGI TP9400 and SGI TP9500 RAID User’s Guide
(P/N 007-4304-

xxx

)

This fully illustrated guide explains how to operate and maintain the SGI TP9400
and SGI TP9500 Fibre Channel storage systems.

•

SGIconsole Hardware Connectivity Guide
(P/N 007-4340-

xxx

)

This fully illustrated guide explains how to connect the SGIconsole to the various
SGI server and graphics system configurations. SGIconsole is a multi-server
management system that manages and monitors multiple servers throughout a
customer’s computing environment, whether those servers are on site or remote.

•

SGI L1 and L2 Controller Software User’s Guide
(P/N 007-3938-

xxx

)

This guide describes how to use the L1 and L2 controller commands at your system
console to monitor and manage your SGI system.

•

Man pages (online)

Man pages locate and print the titled entries from the online reference manuals.

Содержание Origin 3900





































































































































































































































































































Отзывы:

Нет отзывов