manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание, Страница: 197 / 276

Поделиться
Скачать
Silicon Graphics InfiniteStorage 4000 Series Скачать руководство пользователя страница 197

Chapter 11: Maintaining a Storage Array

185

Basic Process Steps

Relocating a volume group includes these procedures: 
1. Verifying the status of the storage array
2. Locating the drives in the volume group
3. Placing the volume group offline
4. Removing drives from the storage array
5. Replacing a volume group into the new storage array
To perform these steps, you must be familiar with the following CLI commands. The 

command syntax is provided to assist in your use of these new commands. 

Volume Group Relocation Commands

Use the following command to place a specific storage array into an exported state so 

that its drives can be removed.

start volumeGroup [

volumeGroupName

] export

At this point you are allowed to remove the drives that comprise the volume group, 

and physically reinstall them into a different storage array.
Use the following command to logically move a specific storage array from an 

exported state to the complete state.

start volumeGroup [

volumeGroupName

] import

Your relocated volume group is now available for use.
For additional information, refer to these commands in the 

 Command Line Interface 

and Script Commands for Version 10.75

:

show volumeGroup exportDependencies

show volumeGroup importDependencies

show volumeGroup export

show volumeGroup import

Performance 
Tuning

Over time, as a storage array exchanges data between the hosts and the drives, its 

performance can degrade. You can monitor the performance of a storage array and 

make adjustments to the operational settings on the storage array to help improve 

performance.

Monitoring the 
Performance

You can monitor the performance of a storage array by using the 

save 

storageArray performanceStats

 command. This command saves 

performance information to a file that you can review to help determine how well the 

storage array is running. The following table lists the performance information that is 

saved to the file.

Содержание InfiniteStorage 4000 Series





















































































































































































































































































Отзывы:

Нет отзывов