manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание, Страница: 158 / 276

Поделиться
Скачать
Silicon Graphics InfiniteStorage 4000 Series Скачать руководство пользователя страница 158

146

Creating a Synchronous Mirroring Pair 

The secondary volume must be of equal or greater size than the primary volume.

The RAID level of the secondary volume does not have to be the same as the 

primary volume.

Use these steps to create the volume.
1. Enable the Synchronous Mirroring premium feature.
2. Activate the Synchronous Mirroring premium feature.
3. Determine candidates for a remote mirrored pair.
4. Create the remote mirrored pair.

Performance 
Considerations

Keep these performance considerations in mind when you create mirror relationships:

The controller owner of a primary volume performs a full synchronization in the 

background while processing local I/O writes to the primary volume and 

associated remote writes to the secondary volume. Because the full 

synchronization diverts controller processing resources from I/O writes, full 

synchronization can have a performance impact to the host application. 

To reduce the performance impact, you can set the synchronization priority level 

to determine how the controller owner will prioritize the full synchronization 

relative to other I/O activity. To set the synchronization priority level, consider 

these guidelines:

—

A full synchronization at the lowest synchronization priority level takes 

approximately eight times as long as a full synchronization at the highest 

synchronization priority level.

—

A full synchronization at the low synchronization priority level takes 

approximately six times as long as a full synchronization at the highest 

synchronization priority level.

—

A full synchronization at the medium synchronization priority level takes 

approximately three-and-a-half times as long as a full synchronization at the 

highest synchronization priority level.

—

A full synchronization at the high synchronization priority level takes 

approximately twice as long as a full synchronization at the highest 

synchronization priority level.

When the mirrored volume pair is in a Synchronization in Progress state, all host 

write data is copied to the remote system. Both controller I/O bandwidth and I/O 

latency can affect host write performance. Host read performance is not affected 

by the mirror relationship.

The time that it takes for data to be copied from the primary volume to the 

secondary volume might impact overall performance. This impact is primarily 

caused by the delay and system resource required for copying data to the remote 

mirror. Some delay might also occur because of the limit to the number of 

simultaneous writes.

Содержание InfiniteStorage 4000 Series





















































































































































































































































































Отзывы:

Нет отзывов