manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание


Поделиться
Скачать
background image

142

How Synchronous Mirroring Works 

Table 23  Maximum Number of Defined Mirrors per Storage Array

The primary volume is the volume that accepts host I/O activity and stores application 

data. When the mirror relationship is first created, data from the primary volume is 

copied in its entirety to the secondary volume. This process is known as a 

full 

synchronization

 and is directed by the controller owner of the primary volume. 

During a full synchronization, the primary volume remains fully accessible for all 

normal I/O operations.
The controller owner of the primary volume initiates remote writes to the secondary 

volume to keep the data on the two volumes synchronized. 
The secondary volume maintains a mirror (or copy) of the data on its associated 

primary volume. The controller owner of the secondary volume receives remote 

writes from the controller owner of the primary volume but will not accept host write 

requests. Hosts are able to read from the secondary volume, which appears as 

read-only.
In the event of a disaster or a catastrophic failure at the primary site, you can perform 

a role reversal to promote the secondary volume to a primary role. Hosts then are able 

to read from and write to the newly promoted volume, and business operations can 

continue.

Mirror Repository 
Volumes

A mirror repository volume is a special volume in the storage array that is created as a 

resource for the controller owner of the primary volume in a remote mirrored pair. 

The controller stores mirror information on this volume, including information about 

remote writes that are not yet complete. The controller can use this information to 

recover from controller resets and the accidental powering down of the storage arrays.
When you activate the Synchronous Mirroring premium feature on the storage array, 

you create two mirror repository volumes, one for each controller in the storage array. 

An individual mirror repository volume is not needed for each remote mirror.
When you create the mirror repository volumes, you specify the location of the 

volumes. You can either use existing free capacity, or you can create a volume group 

for the volumes from unconfigured capacity and then specify the RAID level.

Controller Model

Maximum Number of Defined 

Mirrors

AM1331, AM1333, AM1532, 

AM1932

Only supported in a co-existence 

storage environment

E2600

16

CDE3992, CDE3994

64

CE4900

64

CE6998, CE7900

128

Содержание InfiniteStorage 4000 Series





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для InfiniteStorage 4000 Series

Gateway 7250R Rack Mounting Instructions preview
7250R
Бренд: Gateway Страницы: 26
IBM Redbooks ServeRAID-MR10k User Manual preview
Redbooks ServeRAID-MR10k
Бренд: IBM Страницы: 48
IBM System Storage DS4000 Hardware Maintenance Manual preview
System Storage DS4000
Бренд: IBM Страницы: 184
Quantum P1000 Series Unpacking Instructions Manual preview
P1000 Series
Бренд: Quantum Страницы: 32
Google AC-1304 User Manual preview
AC-1304
Бренд: Google Страницы: 14
REBEL OFF ROAD BLACKOUT WINDOW STORAGE SYSTEM Installation Instructions Manual preview
BLACKOUT WINDOW STORAGE SYSTEM
Бренд: REBEL OFF ROAD Страницы: 9
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Бренд: IBM Страницы: 184
Supermicro SUPERSERVER 6034H-X8R User Manual preview
SUPERSERVER 6034H-X8R
Бренд: Supermicro Страницы: 128
SanDisk 175972 User Manual preview
175972
Бренд: SanDisk Страницы: 2
Angel Cool Aironet 1200 Quick Start Manual preview
Aironet 1200
Бренд: Angel Cool Страницы: 2
Hama 104389 Operating Instructions Manual preview
104389
Бренд: Hama Страницы: 8
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Бренд: ANTAIRA Страницы: 19
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Бренд: Genexis Страницы: 9
NCR 7702-K260 Kit Instructions preview
7702-K260
Бренд: NCR Страницы: 10
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Бренд: TP-Link Страницы: 16
SMC Networks SMC-EZ1026DT User Manual preview
SMC-EZ1026DT
Бренд: SMC Networks Страницы: 56
Teldat G1N Installation Manual preview
G1N
Бренд: Teldat Страницы: 23
Ubiquiti EdgeRouter X Quick Start Manual preview
EdgeRouter X
Бренд: Ubiquiti Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды