manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание


Поделиться
Скачать
background image

Chapter 7: Using the Asynchronous Mirroring Premium Feature

121

7

Using the Asynchronous Mirroring Premium Feature

The Asynchronous Mirroring premium feature provides for replicates the data 

between storage arrays over a remote distance. In the event of a disaster or a 

catastrophic failure on one storage array, you can promote the second storage array to 

take over responsibility for computing services. Asynchronous mirroring is designed 

for extended storage environments in which the storage arrays that are used for 

asynchronous mirroring are maintained at separate sites. Volumes on one storage 

array are mirrored to volumes on another storage array across a fabric SAN. Because 

asynchronous mirroring is storage based, it does not require any server overhead or 

application overhead.
Asynchronous mirroring is managed on a per-volume basis, enabling you to associate 

a distinct remote mirrored volume with one or more primary volume on a given 

storage array. Point-in-time images are used on the primary volume and the secondary 

volume to batch the resynchronization process. A data repository volume is required 

for each mirrored volume. Also, you can create asynchronous mirror groups that 

enable you to manage the synchronization process as a set to create consistent data on 

the remote storage array. 
Asynchronous mirroring can use either Fibre Channel or iSCSI to communicate with 

the remote array. Inter-controller communication for asynchronous mirroring uses the 

host-connected ports to initiate connections to the remote system. The iSCSI 

inter-controller communication must use a host-connect port, not the management 

Ethernet port. A controller can receive host I/O through one protocol and use a 

different protocol for asynchronous mirroring with a remote storage array. For 

example, a host can be attached to the controller through a SAS connection while the 

inter-controller mirroring data is sent over ISCSI to the remote storage array.
The asynchronous write mode of the legacy Synchronous Mirroring premium feature 

is still supported, but the new Asynchronous Mirroring premium feature is the 

preferred method to use if available on your storage array. Some key differences 

between Asynchronous Mirroring premium feature and the Synchronous Mirroring 

premium feature are these:

With the Asynchronous Mirroring premium feature, a data repository volume is 

required for each mirror. The Synchronous Mirroring premium feature has a 

single repository for all mirrored volumes.

The Asynchronous Mirroring premium feature uses point-in-time images on the 

primary and secondary volumes to batch the resynchronization process. 

The Asynchronous Mirroring premium feature organizes mirrored volumes into 

groups to manage the synchronization process to create a consistent data set on 

the remote storage array.

The Asynchronous Mirroring premium feature supports iSCSI and Fibre Channel 

connections between storage arrays. The Synchronous Mirroring premium 

feature supports only Fibre Channel connections.

Содержание InfiniteStorage 4000 Series





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для InfiniteStorage 4000 Series

iDiskk mini Instruction Manual preview
mini
Бренд: iDiskk Страницы: 11
i-MO 540 Series Product Installation Manual preview
540 Series
Бренд: i-MO Страницы: 58
DCE ANS-205 User Manual preview
ANS-205
Бренд: DCE Страницы: 5
Husky AISLE SHIELD Installation Instructions Manual preview
AISLE SHIELD
Бренд: Husky Страницы: 8
LaCie d2 Ethernet Disk mini Quick Install Manual preview
d2 Ethernet Disk mini
Бренд: LaCie Страницы: 23
Rocsecure ROCBIT 2 Instruction Manual preview
ROCBIT 2
Бренд: Rocsecure Страницы: 10
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Бренд: Maipu Страницы: 80
IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Бренд: IEI Technology Страницы: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Бренд: IBM Страницы: 32
xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Бренд: xFusion Digital Technologies Страницы: 61
LaCie FastKey User Manual preview
FastKey
Бренд: LaCie Страницы: 54
StarTech.com RAIDBAY3 Installation Manual preview
RAIDBAY3
Бренд: StarTech.com Страницы: 7
NEC LL030F User Manual preview
LL030F
Бренд: NEC Страницы: 254
Moxa Technologies NPort P5250A Series Quick Installation Manual preview
NPort P5250A Series
Бренд: Moxa Technologies Страницы: 2
Solwise WLn-401 Quick Installation Manual preview
WLn-401
Бренд: Solwise Страницы: 7
Velleman VWS2E Manual preview
VWS2E
Бренд: Velleman Страницы: 17
BlueBroadcaster iSENDER User Manual preview
iSENDER
Бренд: BlueBroadcaster Страницы: 21
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Бренд: NETGEAR Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды